EV training in Jammu, India · online + hands-on
Some of our programmes are created with I3C–IIT Jammu and DIYguru, so Jammu has a direct link to how they are built. Classes run online, not on the IIT Jammu campus. Hands-on modules take place at DIYguru centres in Delhi and Pune.
Our admissions team replies by phone or WhatsApp with fees, EMI options and the next batch dates.
EV skills in Jammu
Jammu and Kashmir notified its first Electric Vehicle Policy in October 2026. It runs from 2026 to 2032 and targets 1.4 lakh EVs and 900 public charging sites, including 140 fast-charging hubs. It also adds a winter validation protocol, so vehicles are tested for snow and sub-zero conditions.
Jammu already runs electric buses bought under FAME II. Under PM e-Bus Sewa, Jammu Smart City is adding 100 more, a mix of 25 twelve-metre and 75 seven-metre buses, and depot and power plans for them were approved in early 2026.
The policy offers top-ups for the first 10,000 electric two-wheelers, the first 1,500 electric cars and the first 300 electric buses.
Eligible EV loans get 3–5% interest subvention for up to 36 months.
New buildings must make 20% of their parking EV-ready under the building bye-laws.
Seven-metre e-buses make up most of Jammu's PM e-Bus Sewa share, suited to narrower city roads.
Programmes
Every programme below is open to learners in Jammu, India. The first 5 fit the Jammu market best; the rest cover other EV specialisations.
PG CertificateFlagshipA 12-month, hybrid Post Graduate Certificate Programme in EV & Embedded Technology, created by IIT Jammu in collaboration with I3C–IIT Jammu and DIYguru, that takes…
NanodegreeA six-month, live and hands-on Advanced Nanodegree in Battery and BMS Design, Analysis and Simulation, created by IIT Jammu in collaboration with I3C–IIT Jammu and…
NanodegreeA six-month, live and hands-on Advanced Nanodegree in Embedded Systems for EV engineering, created by IIT Jammu in collaboration with I3C–IIT Jammu and DIYguru. You…
TechnicianCEVT is a three-month, live and hands-on Certified Electric Vehicle Technician programme that prepares ITI, Diploma and Polytechnic learners for careers in 2W and 4W EV…
Prof. CertificationProfessional Certification Program in Charging Technologies and Hydrogen Fuel Cell systems for Electric Vehicles
M.Tech DegreeNewA two-year, research-based M.Tech in Electric Vehicle Technology awarded by Ajeenkya DY Patil University (ADYPU), Pune, and delivered with DIYguru under the UGC…
NanodegreeA six-month, live and hands-on Advanced Nanodegree in EV Modelling & Simulation Engineering for electrical and electronics engineers, created by IIT Jammu in…
NanodegreeA six-month, live and hands-on Advanced Nanodegree in EV engineering, automotive design, development and dynamic analysis for mechanical and automotive engineers…
NanodegreeA six-month, live and hands-on Advanced Nanodegree in ADAS & AUTOSAR, created by IIT Jammu in collaboration with I3C–IIT Jammu and DIYguru, that takes you from sensor…
NanodegreeAdvanced Nanodegree Program in Building Your EV Business: From Charging Stations to Service Solutions
NanodegreeAn industry-focused Nanodegree in Analytics & Data Science that starts you on the path to becoming a data analyst in the automotive and EV sector. An 8-step curriculum…
Prof. CertificationProfessional Certification Program in EV Engineering: From Industry Ecosystem to Advanced Technical Understanding
Prof. CertificationProfessional Certification Program in EV Automotive Design and Simulation
Prof. CertificationProfessional Certification Program in Battery Technology and Powertrain Engineering
Prof. CertificationProfessional Certification Program in Embedded Systems for Electric Vehicle Engineering
Prof. CertificationProfessional Certification Program in Motor Drive Systems & Control Systems
Prof. CertificationProfessional Certification Program in Data Science and Engineering Analytics for EVs
Prof. CertificationProfessional Certification Program in Electric Vehicle Design and Simulation Engineering
Prof. CertificationAn industry-ready Professional Certification Programme in EV Sales & Business, delivered through live classes and practical learning. Across six modules you learn how EV…
Prefer a single short course? Browse all EV courses.
Who it is for
The 12-month PG programme in EV embedded systems is created with IIT Jammu and DIYguru, with hands-on modules at our centres and placement support.
Nanodegrees, also created with IIT Jammu, let you specialise in batteries, electrical design or embedded systems while you work.
CEVT prepares you to service electric two-wheelers and cars, with a 21-day workshop at a DIYguru centre.
With 900 charging sites planned, the charging and hydrogen programme covers charger types, standards and grid basics.
Studying from Jammu
Apply from Jammu; our admissions team confirms the fees, EMI options and your batch dates.
Join live classes with EV engineers, then go back to recorded lessons, notes and quizzes whenever you need them.
Work through design calculations, simulations and projects. An optional DIY hardware kit lets you practise on a real control board at home, delivered anywhere in India.
The CEVT and PG programmes include hands-on workshops at our Delhi and Pune centres: batteries, motors, controllers, charging and diagnostics on real vehicles. Nearest to Jammu: Delhi (Sultanpur).
Finish the projects and assessments to earn your certificate, with a verification link you can share with employers.
Certificates
Jammu and Kashmir has no licence for EV technicians, and India has no national EV technician licence. ASDC publishes NSQF-aligned EV job roles that describe service and assembly skills. Charger installation is electrical work under the Central Electricity Authority's safety regulations and the UT's rules, and needs licensed electrical personnel. Our certificate shows you completed the training; it is not a licence, and it is not an IIT Jammu degree.
FAQs
No. The PG programme and Nanodegrees are created with I3C–IIT Jammu and DIYguru, but teaching happens online. Hands-on modules run at DIYguru centres in Delhi and Pune.
Our nearest centre is in Delhi, at 374, MG Road, Sultanpur. You travel there only for workshop days.
Freshers with a B.Tech often choose the 12-month PG programme. Working engineers usually prefer a Nanodegree, which is shorter and fully online apart from optional workshops.
It shows focused EV training and completed projects, which helps when you apply. The PG programme includes placement support, but nothing guarantees a job.
Fees are on each programme page in INR. The admissions team shares the current fee and any EMI options.
Professional Certification Programmes run for about 3 months, the CEVT technician programme 3 months, Advanced Nanodegrees 6 months and the Post Graduate programme 12 months.
Yes. The CEVT programme is built for ITI, diploma and polytechnic learners and working mechanics: EV batteries, motors, controllers, charging and diagnostics for two- and four-wheelers, with a 21-day hands-on workshop at our Delhi or Pune centre.
Nearby
Tell us your background and we will suggest the right programme and the next batch.
