EV training in Bengaluru, India · online + hands-on
Electric vehicle training in Bengaluru
Bengaluru's engineers already write the software and design the electronics that EVs run on. Our EV course in Bengaluru is taught online, with live evening classes, recorded lessons and real projects, so you can study around a full-time job. Hands-on workshops take place at our Pune and Delhi centres.
Live online classes with EV engineers
Recorded lessons to study on your schedule
Projects, assessments and a certificate
Hands-on workshops at our Pune (DY Patil University campus) centre
Our admissions team replies by phone or WhatsApp with fees, EMI options and the next batch dates.
EV skills in Bengaluru
Why EV skills matter in Bengaluru
Learners at EV lab workstations
Karnataka was the first Indian state to publish a dedicated EV policy, in 2017, with the stated aim of making Bengaluru the country's EV capital. Its Clean Mobility Policy 2025–30, released at the Invest Karnataka summit in February 2025, aims for about ₹50,000 crore of investment and one lakh jobs, with clean-mobility clusters planned at Harohalli, Dharwad and Gauribidanur.
Much of the hardware is built just over the border. Ather Energy makes its scooters in Hosur, TVS Motor rolled out its one millionth iQube there in June 2026, and Ola Electric's scooter factory and cell gigafactory are in Krishnagiri district. Back in the city, the work that pulls engineers in is battery management, motor control firmware, ADAS and vehicle software.
A large electric bus fleet
BMTC ran more than 1,500 electric buses in September 2025, about one in five buses in its network.
More buses on the way
The Centre agreed 4,500 e-buses for Bengaluru under the PM E-DRIVE scheme, and the first contract, for 1,750 buses, has been awarded.
A growing Hosur base
Ather is expanding its Hosur capacity from 4.2 lakh to about 4.95 lakh two-wheelers a year, due by December 2026.
State incentives
The 2025–30 policy offers a capital subsidy for manufacturers and road-tax and registration exemptions for most EV categories.
Programmes
Electric vehicle programmes for learners in Bengaluru
Every programme below is open to learners in Bengaluru, India. The first 5 fit the Bengaluru market best; the rest cover other EV specialisations.
A 12-month, hybrid Post Graduate Certificate Programme in EV & Embedded Technology, created by IIT Jammu in collaboration with I3C–IIT Jammu and DIYguru, that takes…
A six-month, live and hands-on Advanced Nanodegree in ADAS & AUTOSAR, created by IIT Jammu in collaboration with I3C–IIT Jammu and DIYguru, that takes you from sensor…
A six-month, live and hands-on Advanced Nanodegree in Battery and BMS Design, Analysis and Simulation, created by IIT Jammu in collaboration with I3C–IIT Jammu and…
A six-month, live and hands-on Advanced Nanodegree in Embedded Systems for EV engineering, created by IIT Jammu in collaboration with I3C–IIT Jammu and DIYguru. You…
CEVT is a three-month, live and hands-on Certified Electric Vehicle Technician programme that prepares ITI, Diploma and Polytechnic learners for careers in 2W and 4W EV…
A two-year, research-based M.Tech in Electric Vehicle Technology awarded by Ajeenkya DY Patil University (ADYPU), Pune, and delivered with DIYguru under the UGC…
A six-month, live and hands-on Advanced Nanodegree in EV Modelling & Simulation Engineering for electrical and electronics engineers, created by IIT Jammu in…
A six-month, live and hands-on Advanced Nanodegree in EV engineering, automotive design, development and dynamic analysis for mechanical and automotive engineers…
An industry-focused Nanodegree in Analytics & Data Science that starts you on the path to becoming a data analyst in the automotive and EV sector. An 8-step curriculum…
An industry-ready Professional Certification Programme in EV Sales & Business, delivered through live classes and practical learning. Across six modules you learn how EV…
If you already write C for microcontrollers, the PG programme in EV embedded systems takes you into BMS, motor control and vehicle networks.
Software engineers moving into automotive
The ADAS and AUTOSAR Nanodegree covers the architecture and safety thinking that vehicle software teams expect.
Battery and power electronics engineers
The battery and BMS Nanodegree goes deep on cell behaviour, pack design, state-of-charge estimation and thermal limits.
Service technicians
Two-wheeler and car technicians seeing more EVs in the workshop can take CEVT, which includes a 21-day hands-on block in Pune.
Studying from Bengaluru
How the training works
1. Enrol online
Apply from Bengaluru; our admissions team confirms the fees, EMI options and your batch dates.
2. Learn live and on demand
Join live classes with EV engineers, then go back to recorded lessons, notes and quizzes whenever you need them.
3. Build and simulate
Work through design calculations, simulations and projects. An optional DIY hardware kit lets you practise on a real control board at home, delivered anywhere in India.
4. Train hands-on at a DIYguru centre
The CEVT and PG programmes include hands-on workshops at our Delhi and Pune centres: batteries, motors, controllers, charging and diagnostics on real vehicles. Nearest to Bengaluru: Pune (DY Patil University campus).
5. Get certified
Finish the projects and assessments to earn your certificate, with a verification link you can share with employers.
Certificates
Certificates and EV work rules in India
India has no single licence an EV engineer or technician must hold. The Automotive Skills Development Council publishes NSQF-aligned EV roles, such as Electric Vehicle Service Technician, which employers sometimes use as a benchmark. Installing chargers or doing building wiring in Karnataka is different: that work needs a licensed electrical contractor and must follow the Central Electricity Authority's safety regulations. Our certificate records the training you completed; it is not a licence.
FAQs
EV training in Bengaluru: common questions
Is there an EV training institute in Bengaluru where I can attend workshops?
We have an office in JP Nagar for admissions and enquiries, but no workshop or training centre in Bengaluru. Hands-on sessions run at our Pune centres in Hinjewadi and at the Ajeenkya DY Patil University campus in Lohegaon, which are the nearest to you.
Can I do this EV course in Bengaluru while working at a tech company?
Yes. Live classes are held in the evening and on weekends, and every session is recorded. Most Bengaluru learners study alongside a full-time role.
I have a B.Tech in ECE. Which programme fits me?
The 12-month PG programme in EV embedded systems, built with IIT Jammu and DIYguru, suits electronics graduates best and comes with placement support. If you want a degree, look at the two-year M.Tech in EV Technology from Ajeenkya DY Patil University.
Will a certificate help me move into an EV company in Bengaluru?
It shows hiring teams you have studied EV systems in a structured way and done projects you can talk about. It does not guarantee a job.
How do I find EV training near me in Bengaluru?
Our classes are online, so you can join from anywhere in the city. For practical work you travel to a DIYguru centre in Pune for the workshop days.
What are the fees, and is EMI available?
Fees differ by programme and are listed on each programme page. The admissions team will share the current fee and any EMI options when you enquire.
How long does an electric vehicle course take?
Professional Certification Programmes run for about 3 months, the CEVT technician programme 3 months, Advanced Nanodegrees 6 months and the Post Graduate programme 12 months.
Is there an EV mechanic course in Bengaluru?
Yes. The CEVT programme is built for ITI, diploma and polytechnic learners and working mechanics: EV batteries, motors, controllers, charging and diagnostics for two- and four-wheelers, with a 21-day hands-on workshop at our Delhi or Pune centre.
Which EV programme suits an engineering graduate?
Electrical and electronics engineers usually pick the EV modelling or battery and BMS Nanodegrees, mechanical engineers the EV automotive design Nanodegree, and embedded or software engineers the embedded systems or ADAS & AUTOSAR tracks.