Certification Course in ANSYS: From Fundamentals to Structural Analysis
-
Welcome to the Course!
-
Module 1: Getting Started with ANSYS and Simulation TechniquesTopic 1: Introduction to CAD, CAM & CAE – Understanding the Design Process8m 14sTopic 2: Introduction to ANSYS – Fundamentals of Simulation8m 1sTopic 3: Understanding Pre-Analysis in Simulation4m 49sTopic 4: Verifying and Validating the Model in Simulation11m 30sTopic 5: ANSYS Installation Guide (Official Student Version)8m 12sTopic 6: Exploring ANSYS Interface19m 50s
-
Module 2: Fundamentals of FEA and Material Properties for SimulationTopic 1: Introduction to FEA & FEM – Key Concepts12m 6sTopic 2: Nodes and Elements in FEA14m 10sTopic 3: Understanding Degree of Freedom (DOF) in FEA10m 34sTopic 4: Classification of Materials in FEA12m 14sTopic 5: Understanding Isotropic & Orthotropic Materials14m 18sTopic 6: Implicit vs Explicit Analysis11m 23s
-
Module 3: Working with ANSYS Workbench: Project Setup & First Simulation
-
Module 4: ANSYS Pre-Processing Workflow – From Geometry Preparation to Meshing FundamentalsTopic 1: Starting with Pre-Processing – Importing CAD Geometry in ANSYS16m 56sTopic 2: Geometry Clean-up and Simplification Using Ansys SpaceClaim – Part 125m 7sTopic 3: Geometry Clean-up and Simplification Using Ansys SpaceClaim – Part 222m 5sTopic 4: Geometry Clean-up and Simplification Using Ansys SpaceClaim – Part 322m 27sTopic 5: Creating New Geometry Using ANSYS SpaceClaim14m 53sTopic 6: Creating and Editing Coordinate Systems11m 44sTopic 7: Meshing Fundamentals Part 124m 33sTopic 8: Meshing Fundamentals Part 223m 10sTopic 9: Meshing Fundamentals Part 319m 25sTopic 10: Meshing Fundamentals Part 428m 50s
-
Module 5: ANSYS Static Structural Analysis – Setup, Simulation, and ResultsTopic 1: Setting-Up a Static Structural Analysis on Battery Pack in ANSYS Mechanical – Part 132m 6sTopic 2: Setting-Up a Static Structural Analysis on Battery Pack in ANSYS Mechanical – Part 224m 30sTopic 3: Applying Boundary & Load Conditions in Static Structural Analysis20m 15sTopic 4: Material Selection Criteria in Structural Simulations19m 36sTopic 5: Running Analysis and Results15m 16s
-
DIY Projects:
This Certification Course in ANSYS: From Fundamentals to Structural Analysis is designed to take learners from the basics of Computer-Aided Engineering (CAE) to performing full-scale structural simulations using ANSYS Workbench. Starting with foundational concepts like FEA and FEM, the course guides students through software installation, geometry cleanup, meshing, and structural analysis setup. Real-world engineering scenarios are used to demonstrate material selection, boundary condition application, and result interpretation. Whether you’re a student, engineer, or professional looking to upgrade your simulation skills, this course provides the knowledge and tools to excel in the world of virtual product testing and structural mechanics.
What's included
- 5 Modules.
- 30 Lectures.
- 8.29 hours of Video Content.
- 1 Project Assignment.
- Certification of Completion.
