3-Week Summer Training/Internship on 4-Wheeler Electric Vehicle
DIYguru & ev.care presents India’s first comprehensive 3-week Summer Training & Internship Program on 4-Wheeler Electric Vehicles, designed in close alignment with Mahindra EV platforms. This program offers a unique opportunity for engineering students and professionals to gain hands-on experience and deep technical knowledge in the fast-evolving field of electric mobility.
Over the course of 80 industry-focused hours, participants will undergo rigorous training that spans all critical subsystems of a 4-wheeler EV. The curriculum is divided into seven technical modules, covering everything from electric vehicle architecture and battery pack construction to motor control, power electronics, CAN communication, diagnostics, and system-level integration.
Besides, participants will gain hands-on exposure through live demonstrations, simulations, and real-vehicle analysis, ensuring they acquire practical, industry-relevant skills.
Designed for students and professionals aiming to build a career in the EV industry or the repair and maintenance sector, the program emphasizes real-world experience. By the end of the program, participants will have acquired practical knowledge, domain expertise, and career-readiness, positioning them for success in the evolving electric vehicle industry.
Course Curriculum
Day 1-3: Module 1 – EV System Architecture & Safety Protocol
-
Introduction to the overall layout of a four-wheeler EV: powertrain, battery, controller, motor
-
Cover safety standards, high-voltage system precautions, PPE (Personal Protective Equipment), and isolation procedures.
-
Practical: Identify orange high-voltage cables, understand shutdown circuits, and practice safe disconnects
Day 4-7: Module 2 – Battery Pack Construction & Management
Day 7-10: Module 3 – Electric Motor & Inverter Control
Day 10-12: Module 4 – EV Charging Systems & Communication
Day 13-15: Module 5 – Powertrain Integration & CAN Communication
Day 16-18: Module 6 – Troubleshooting & Diagnostics
Day 18-20: Module 7 – EV Walkthrough & Live Demonstration
Day 21: Module 8 – Wrap-Up & Certification
Student Ratings & Reviews
Hardware & Software Required
- Software: Proficient in MATLAB, Proteus, and SolidWorks
- Hardware: Preferably experienced with vehicle-related projects
DIY Projects Included
The 21-day workshop combines live demonstrations, simulations, and real-vehicle analysis to ensure hands-on, industry-relevant skill development.
Participants will gain hands-on experience with high-voltage electrical systems, including safety procedures, wiring simulations, and sensor diagnostics. They will then engage in practical tasks such as monitoring motor performance, diagnosing inverter feedback, performing AC charging, and using public charging stations. Additionally, participants will work with CAN software to analyze live vehicle data, diagnose common faults, and resolve error codes. To consolidate their learning, an optional hands-on driving or test bench session allows them to apply the theory in a real-world setting.
Course Benefits
- Hands-On Experience: Real-time simulation, diagnostics, and vehicle analysis.
- Industry-Certified Training: ASDC & AICTE-backed certification recognized across the EV industry.
- Job-Ready Skills: Practical exposure aligned with real-world applications on Mahindra EV platforms.
- Live Projects: Interaction with physical EV subsystems—battery, motor, controller, and more.
- Networking Opportunities: Learn alongside other passionate students and interact with EV industry experts.
- Career Guidance: Final-day career session, resume tips, and interview readiness support.
Technical expertise you will gain
- EV Powertrain Architecture & Subsystem Layout
- Electric Motor Types (BLDC, PMSM, Induction) & Control Logic
- Inverter Operation, Torque Commands & RPM Feedback
- EV Charging Standards (AC/DC, CCS, CHAdeMO, Bharat EV)
- CAN Communication Protocol & Live Signal Monitoring
- Diagnostic Trouble Code (DTC) Detection & Troubleshooting
- Real-Time Vehicle System Simulation & Performance Analysis
- Hands-On Use of CAN Tools, BMS Simulators, and Inverter Software
- EV System Integration & Interfacing of Battery, Motor & Controller
- Live Demonstration of Full EV System Mapping & Test Bench Operation
- Electric Vehicle Design & R&D
- Battery Pack Development and Testing
- Vehicle Diagnostics and Maintenance
- Charging Infrastructure & Energy Management
- Automotive Embedded Systems
- EV Manufacturing and Assembly
- Power Electronics and Motor Control
- EV Design Engineer
- Battery Pack Design Engineer
- Motor Control Engineer
- EV Charging Systems Specialist
- Diagnostic Technician
- Powertrain Integration Engineer
- Field Service Engineer (EV)
- Automotive CAN Communication Engineer
- Electrical system safety (High-voltage handling, PPE, isolation)
- Battery modeling, cell wiring simulation, and BMS understanding
- Real-time control of motors and inverter communication
- Electrical system safety (High-voltage handling, PPE, isolation)
- Battery modeling, cell wiring simulation, and BMS understanding
- Charging system design, usage, and troubleshooting
- CAN bus protocol implementation and DTC reading
- Root cause fault analysis and structured troubleshooting
- Vehicle inspection, subsystem mapping, and test bench operation
- Use of industry tools: CAN software, motor monitoring tools, simulation platforms
- Tata Motors
- Mahindra Electric
- Ather Energy
- Bosch India
- KPIT Technologies
- Ola Electric Mobility
- L&T Technology Services
- Tata Power EZ Charge
- Continental Automotive India
- Hero Electric
Who can take this course?
- Engineering Students
- Postgraduate Students
- ITI/Polytechnic Students
- Working Professionals
- Entrepreneurs
- Faculty & Researchers
- EV Enthusiasts
Personalized Trainer Support Portal:
- 24/7 Access to a personalized trainer support portal.
- One-on-One mentorship for queries and project guidance.
- Access to diverse resources, including recorded lectures, reading materials, and practical guides.
- Dedicated forums for content discussion, insights, and project collaboration.
- Regular feedback from trainers for comprehensive understanding and improvement.
Government-Certified. Industry-Endorsed. Learner-Approved.
India's largest ASDC-certified EV training organisation — with multi-layer Government of India recognitions, 300+ industry hiring partners, and a 4.8-star verified learner rating.
ASDC Certified
Automotive Skills Development Council, Government of India — recognised by every major auto OEM.
Verified Credential
AICTE NEAT
National Educational Alliance for Technology — AICTE's premium learning ecosystem.
Verified Credential
Ministry of Education
Recognised by Ministry of Education, Government of India, and NITI Aayog.
Verified CredentialOur 50,000+ Alumni Work At
Top OEMs, Tier-1 suppliers, and EV startups hire DIYguru-certified professionals
Placement powered by emobility.careers — India's only EV-specific job portal
What Our Alumni Say
Real feedback from verified learners who completed the programme and moved into EV careers.
"The hands-on workshops and live projects gave me real EV skills. I got placed at Tata Motors within 2 months of certification. The BMS module is especially strong."
"Switched from a mechanical design role to EV powertrain after the course. The curriculum is industry-aligned and mentors are from top EV companies. Totally worth it."
"Best EV training in India, hands down. The placement support through emobility.careers was what actually made the difference. Interviewed at 6 companies, got 3 offers."
Ready to Launch Your EV Career?
Get free 1-on-1 counselling from a DIYguru EV career advisor. We'll help you pick the right course, explain placement support, and share the next batch dates.
- Free career counselling within 24 hours
- Personalised course recommendation
- EMI options starting ₹4,083/month at 0%
- Direct access to 300+ EV hiring partners
Get Free EV Career Counselling
Speak with an advisor in 24 hours
